Chicken Plucking Machine
Chicken Plucking MachineChicken Plucking MachineChicken Plucking Machine
Chicken Plucking MachineChicken Plucking MachineChicken Plucking Machine

Chicken Plucking Machine

Material: Stainless Steel

Voltage: 110v / 220v

Power: 1.5KW

Work ability: 5-15pcs chicken

Depilator Rate: 98%

Work life: 10 years

Usage: chikken, quail, goose, duck, turkey, etc

Full Data

size(cm)

weight

power(w)

No. fingers

work (one time)

60*60*87

50kg

1500w

106pcs

4-5 chicken

68*67*92

60kg

2200w

114pcs

7-8 chicken

79*80*91

80kg

3500w

147pcs

more than 10 chicken

94*97*92

100kg

3500w

193pcs

more than 15 chicken

 

Features:

  • 01
    A-shape cage system has a good ventilation, better for the beginner.
  • 02
    The cage adopts electrostatic spraying and treated with epoxy resin powder composite coating with a thickness of 100-300mm. The anticorrosive effect is 3-4 times of the general galvanized steel wire mesh.
  • 03
    A-shape cage system has a good ventilation, better for the beginner.
  • 04
    A-shape cage system has a good ventilation, better for the beginner.
  • 05
    A-shape cage system has a good ventilation, better for the beginner.
  • 06
    A-shape cage system has a good ventilation, better for the beginner.

 

Operation Process:

1. Scald the poultry after slaughtered by hot water of 65-80 degree.

2. Then turn on the machine,put the scalded poultry into the machine(ginger,potato and fish can put into directly).

3.After 10 seconds working,turn on the tap,and wash away the removed feather,then take out the poultry. 

4. The whole process of process quail is about 20seconds.

 

Attention:

1. Equip a leakage switch on the ground line.

2. Turn on the switch, and check if the machine running normally before using.

3. Wash the tube completely after using.

4. After long time using, please change the robber stick when they are wearing or broken. So as to ensure the working efficiency.

5. After a period of using, if the rolling disc become slower, it might be the belt screw track slip.

6. Then please adjust the nut on the machine base, but note it can't be too tight.

Cases

Inquiry

Please send your requirements,we will reply you within 24 hours.